China Filter letlooeng pakete extruder letlooeng disc le fapaneng boholo le dibopeho Manufacture le Feme

Filter mesh pack extruder mesh disc e nang le boholo bo fapaneng le libopeho

Filter mesh pack extruder mesh disc with different size and shapes Featured Image

tlhaloso e khuts'oane:

Likaroloana:

Tlhophiso e sebetsang hantle

Sebopeho se matla, ho hanyetsa khatello

Anti-acid le alkaline;

Ho nepahala ho sefa ho tsitsitseng, ts'ebetso e bonolo;

Ho bonolo ho kenya

Bophelo bo bolelele, bo sebelisoa hape

E hloekisoa habonolo ka ho tšoarella ho hoholo, mochini o phahameng

Ho hanyetsa 'mele le lik'hemik'hale tse phahameng

Re romelle lengolo-tsoibila Khoasolla joalo ka PDF

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Filter mesh pack e boetse e bitsoa extruder mesh packs, e entsoe ka tšepe e lohiloeng kapa e sintered mesh. E fana ka extrusion e hloekileng le e hlakileng bakeng sa mochini o qhibilihisang le oa polasetiki oa extrusion processing.the filter mesh pack e na le tšobotsi ea ho hanyetsa acid, ho hanyetsa alkali, ho phahameng ho hanyetsa mocheso, matla a matla a ho tsitsa le ho hanyetsa abrasion.

Re fana ka mefuta e fapaneng ea li-mesh pack tseo u li khethileng, ho kenyeletsoa lera le le leng, lilae tse ngata, tse koahetsoeng ka mahlakoreng, li-welded le tse sintered. Li-filters li ka sebelisoa ka lisebelisoa tse sa feleng, lisebelisoa, lisebelisoa le mechine. , li-ducts e le li-filters tse ka hare, tsamaiso ea ho hloekisa, joalo-joalo.

Lintho tse bonahalang: tšepe e sa hloekang, koporo, aluminium, nickel, monel, inconel, tšepe ea masenke joalo-joalo.

Sefa letlooeng: 1-3000mesh le 0.018-2mm

Lintlha tsa sefeMatla: 3-200micron

Mofuta

Ka sebopeho: Rectangle, selikalikoe, selikalikoe, sekontiri, letheka, sebopeho se khethehileng

Ka sebopeho: Mesh e nang le lera le le leng, mesh e nang le likarolo tse ngata tse kopantsoeng, mesh e kopaneng ea filthara.

Ka lera: lera le le leng, mekhahlelo e habeli, mekhahlelo e meraro, mekhahlelo e mene, mekhahlelo e mehlano le mekhahlelo e mengata

Ka mokhoa: ts'ebetso: 1. Multi-layer spot welding filter mesh. 　2, mesh e nang le mekhahlelo e mengata

phuthela Boholo: efe kapa efe e fumaneha ho latela tlhoko ea hau.

Tšebeliso

Polymer extrusion

Evaporation le filtration tshebetso ya rabara;

indasteri ea polasetiki, tlhahlobo ea lijo-thollo le oli;

petroleum, indasteri ea lik'hemik'hale;

Khoele ea polyester ea bochabela, likhoele tsa polyester tse tsitsitseng.

Lesela la polypropylene.

Ho hloekisa lijo le lero

indasteri e bobebe, meriana, tšepe, mochini;

kaho ea likepe le indasteri e meng.

Litlhaloso tsa sephutheloana sa mesh

Letlooa le ohiloeng le bonolo

letlooeng/inch	bophara ba terata(mm)	lesoba(mm)	letlooeng/inch	wirediameter(mm)	lesoba(mm)
2 mesh	1.80	10.90	60 mesh	0.15	0.273
3 mesh	1.60	6.866	70 mesh	0.14	0.223
4 mesh	1.20	5.15	80 mesh	0.12	0.198
5 mesh	0.91	4.17	90 mesh	0.11	0.172
6 mesh	0.80	3.433	100 mesh	0.10	0.154
8 mesh	0.60	2.575	120 mesh	0.08	0.132
10 mesh	0.55	1.990	140 mesh	0.07	0.111
12 mesh	0.50	1.616	150 mesh	0.065	0.104
14 mesh	0.45	1.362	160 mesh	0.065	0.094
16 mesh	0.40	1.188	180 mesh	0.053	0.088
18 mesh	0.35	1.060	200 mesh	0.053	0.074
20 mesh	0.30	0.970	250 mesh	0.04	0.061
26 mesh	0.28	0.696	300 mesh	0.035	0.049
30 mesh	0.25	0.596	325 mesh	0.03	0.048
40 mesh	0.21	0.425	350 mesh	0.03	0.042
50 mesh	0.19	0.318	400 mesh	0.25	0.0385

Dutch weave letlooeng

Mesh	Wire Dia. (MM)	Boitsebiso(AISI)
12meshX64mesh	0.58/0.40	304 kapa 316
24meshX110mesh	0.36/0.25	304 kapa 316
14meshX88mesh	0.50/0.33	304 kapa 316
30meshX150mesh	0.18/0.14	304 kapa 316
40meshX200mesh	0.14/0.11	304 kapa 316
50meshX250mesh	0.10/0.071	304 kapa 316
80meshX700mesh	0.06/0.05	304 kapa 316
165meshX800mesh	0.071/0.040	304 kapa 316
165meshX1400mesh	0.05/0.032	304 kapa 316
200meshX1800mesh	0.05/0.03	304 kapa 316
325meshX2300mesh	0.030/0.025	316L
400meshX2800mesh	0.030/0.02	316L